Welcome to the Ceramic Pro family to maximize the effects of Ceramic Pro and to ensure your investment is long lasting, a few basic maintenance steps should be taken to help keep your vehicle looking it's best. With simple care, your coating will reward you for years to come.

CeramicPro Car Washing

           Techniques

First and foremost, your car washing techniques are going to play a critical role in the appearance and the maintenance of your vehicles coating. In this video we go over our recommended washing methods before applying Ceramic Pro Care. 

 Ceramic Pro Care     Application 

This video goes over the 3 important application steps for Ceramic Pro Care. Please watch the video above that goes over the 3 recommended car washing techniques before application of Ceramic Pro Care for the best results.

THE CURING PROCESS

A new Ceramic Pro coating will take about 2-3 weeks to cure to its full strength. During that time, some precautions should be taken.

Curing time is 2-3 weeks depending on environmental conditions such as humidity and temperature. Take special care during time period. The coating can help prevent your clear coat from water spots as it is hydrophobic. Ceramic Pro however is not bullet proof and can still get hard water spots. The coating is less likely to etch than your factory clear, but it can especially get water spots during the curing process and can be costly to remove.

During the curing process avoid:

    • Parking under a trees specially if there are shedding. You don’t want tree sap on a fresh coating.

    • Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.

    • Washing or abrading the paint

If you notice that your car gets water spots, bird droppings, bugs, tree sap or other contaminants during the first two weeks, immediately remove it following our care instructions. Keep in mind the coating is still soft. Be gentle when working on the paint.

AFTER CARE

CERAMIC PRO AFTER CARE & WARRANTY

© 2020 by CeramicBrosNY